These devices are designed to generate a vacuum in a hermetically sealed enclosure. This enclosure is available in 5 standard sizes in our DVACI range.
Under the effect of this vacuum, Boyle-Mariotte’s law gives us : PxV = constant with P the pressure and V the volume.
When the pressure decreases, the volume increases and vice versa.
Bench top range - 3 standard sizes - 2 thickness
CDV-2
- Int. dim. :
280 x 200 x 200 mm - 30 mm acrylic thickness
- Max. vac. level : -950 mbar
- Cover on jacks with ergonomic handle
- Underwater holding grid
- Drain valve
CDV-3
- Int. dim. :
450 x 300 x 250 mm - 30 mm acrylic thickness
- Max. vac. level : -900 mbar
- Cover on jacks with ergonomic handle
- Underwater holding grid
- Drain valve
CDV-4
- Int. dim. :
500 x 350 x 350 mm - 30 mm acrylic thickness
- Max. vac. level : -700 mbar
- Cover on jacks with ergonomic handle
- Underwater holding grid
- Drain valve
CDV-4+
- Int. dim. :
500 x 350 x 350 mm - 50 mm acrylic thickness
- Max. vac. level : -850 mbar
- Cover on jacks with ergonomic handle
- Underwater holding grid
- Drain valve
Frame-mounted range - 2 standard sizes
CDV-5
- Int. dim : 600 x 500 x 400 mm
- 50 mm acrylic thickness
- Max. vac. level : -800 mbar
- Cover on jacks with ergonomic handle
- Underwater holding grid
- Drain valve
- Frame with wheels
CDV-6
- Int. dim : 800 x 600 x 500 mm
- 50 mm acrylic thickness
- Max. vac. level : -750 mbar
- Cover on jacks with ergonomic handle
- Underwater holding grid
- Drain valve
- Frame with wheels
Developed by our R&D centre, each module meets a specific need. They are all fitted with a hybrid power supply, so you can connect either a compressed air network or a vacuum pump.
Hybrids, independent, multiple power supplies
Model S
Control: START and STOP buttons
Digital pressure gauge to set the vacuum set point.
Simple and efficient
Vacuum generation: venturi or pump
Model A
Control: via touch screen
Up to 16 simple programmes with 1 vacuum level and 1 test time.
Vacuum setpoint entered directly on screen.
Vacuum generation: venturi or pump
Model P
Control: Via touch screen
On-board system: ORION OS
On-board programmes: Simple test, leak test up to 4 stages, pharmaceutical test and transport test.
Up to 99 stored programs
2 clearance levels
Supplied with SD card reader
Optional thermal printer for ticket printing.
Vacuum generation: venturi or pump
Device with non-destructive technology
Our partnership with the German company Inficon gives us access to a range of housings for non-destructive testing.
The Contura family is available in 2 sizes: Contura S-400 and Contura S-600.
This equipment enables all types of flexible packaging to be tested quickly and efficiently.
